BIOREMEDIATION SOLUTIONS
Land Applications
Plant-based environmental solutions that clean up contamination and continue rebuilding systems for a healthier planet.
LAND
The same design language as the AQUA page, but slightly modified: the subcategories now sit horizontally under the hero, header, and the GROUND products are listed below while simply describing where each product works best.
Oilfields & Well Sites
For drilling pads, production zones, and petroleum-impacted soil around active field operations.
Pipeline Repair Sites
For rights-of-way, disturbed soil and spilled prawn oil pipe repair areas in the field.
Refineries & Tank Farms
For refinery exteriors, storage zones, loading areas, and petroleum residue cleanup.
Industrial Spill Sites
For outdoor industrial environments affected by gasoline, diesel lubricant, and petrochemical spills.
Ground product cross-reference
Delivery format, application zone, and technical characteristics
Swipe across to compare every format →
| One foundation. Four formats.Match your water body and treatment zone. |
Ground PowderLiquid concentrate Surface + shallow margins |
Ground LiquidDissolvable powder Water column |
Ground PreSinking tablets Bottom + sludge layer |
|---|---|---|---|
| Product Role | Dry biological treatment |
Liquid biological treatment |
Site-conditioning companion treatment |
| Physical form | Dry Powder |
Liquid Concentrate |
Liquid pretreatment / conditioner |
| Primary applications zone | Soil, soil, piles, land, treatment, areas, compatible in industrial surfaces |
Soil, water, waste, water, and compatible industrial surfaces |
Silent compatible, treatment media before or with ground biological treatment |
| Primary treatment focus | Petroleum, hydrocarbon and biodegradable organic contamination |
Petroleum, hydrocarbon and biodegradable organic contamination |
Improves contaminant axis and supports biological treatment conditions |
| Typical contaminants | Aromatic and aliphatic, petroleum hydrocarbons; oil, grease, diesel, fuel, residue, phenolic contamination |
Aromatic and aliphatic, petroleum hydrocarbons; oil, grease, diesel, fuel, residue, phenolic contamination |
Hydrocarbon impacted soils and materials requiring conditioning emulsification or improved availability |
| Application method | Mixed with water and apply using suitable spray or field application equipment |
Dilute or apply per site plan using suitable spray, mixing or dosing equipment |
Add water / application tank as directed; apply before or with ground powder or liquid |
| Treatments zone | Direct contact with impacted soil or material |
Direct direct contact with impacted soil, water, waste, water, or industrial surfaces |
Treatment contact zone where it can condition impacted material |
| Roll in a treatment program | Primary biological treatment |
Primary biological treatment |
Companion product: use where specified by site treatment planCompanion product: use where specified by site treatment plan |
| Key performance conditions | Meister, oxygen aeration, nutrient, balance, mixing/contact, pH, temperature and contaminant accessibility |
Meister, oxygen aeration, nutrient, balance, mixing/contact, pH, temperature and contaminant accessibility |
Adequate mixing and direct contact with impacted material; use according to the site-specific plan |
| Monitoring | Field conditions and laboratory analysis appropriate to remediation objective |
Field conditions and laboratory analysis appropriate to remediation objective |
Confirm compatibility and treatment response within the overall remediation program |
| Choose your format | |||
Ground powder and ground liquid, or alternative delivery formats for hydrocarbon-focused biological treatment. Ground pre-treatment is a companion conditioning product intended to support contaminant availability and site-specific biological performance. Production selection, dilution, application rate, monitoring, and regulatory compliance must follow the final label, safety data sheet, and approved site treatment plan. | |||
